Wednesday, 20 April 2016

How to Unlock a Disabled iPod

In the event that your iPod has been incapacitated, it is totally secured. The main way you'll have the capacity to utilize it again is by restoring it utilizing iTunes or iCloud. On the off chance that you have a reinforcement, you'll have the capacity to recoup your information, yet this procedure will erase everything that is put away on the iPod. There is no other approach to open an incapacitated iPod.

Utilizing iTunes

1.Connect your iPod to your PC. On the off chance that your iPod is debilitated, the best way to open it is to totally delete and reset it. On the off chance that you have a reinforcement, you'll have the capacity to restore it, else you'll lose the greater part of your information. There is no real way to open an impaired iPod unless you utilize the right password or you delete it.[1]

On the off chance that you don't have a PC with iTunes, see the following segment for directions on resetting your iPod utilizing the iCloud site.

2.Open iTunes and select your iPod. You ought to see your iPod recorded at the highest point of the screen.

On the off chance that you are requested a password in the wake of associating your iPod to your PC, or you've never adjusted your iPod with iTunes on your PC some time recently, see the Using Recovery Mode area underneath.

3.Click "Move down Now" to make a reinforcement of your iPod. This will permit you to restore your information after you reset your iPod.

Ensure "This Computer" is chosen to make a complete neighborhood reinforcement.

4.Click "Restore iPod" to start the reset process. This will probably take a couple of minutes to finish. Once the reset procedure is finished, you'll be taken through the iPod's underlying setup process.

5.Select "Restore from iTunes reinforcement" amid the setup process. This will stack the reinforcement that you made so that the greater part of your information is restored.

Utilizing the iCloud Website

1.Use this strategy on the off chance that you don't have admittance to your PC. You can reset your iPod utilizing the Find My iPhone site, the length of your iPod was enrolled with your Apple ID and Find My iPod was empowered in the iCloud menu. This will just work if the iPod is right now associated with a remote system.

Since you'll be doing this remotely, you won't have the capacity to make another reinforcement. This implies the majority of your information will be lost, yet you'll have the capacity to stack any past reinforcements you may have made.

2.Visit .icloud.com/find on another PC or gadget. You can utilize a web program on any gadget or PC, or the Find My iPhone application on another iOS gadget.

3.Log in with your Apple ID. Ensure you sign in with the same Apple ID connected with your iPod.

4.Click the "All Devices" catch at the highest point of the window. This will show the greater part of your Apple gadgets that are associated with your Apple ID.

5.Select your iPod from the rundown. The guide will focus on it, and points of interest will show up in a card.

6.Click the "Delete" catch and affirm. This will send a sign to your iPod to start the reset process. The reset procedure will take a short time to finish

In the event that your iPod can't be reached by Find My iPhone, you'll have to attempt another technique in this article.

7.Setup your iPod like new. Once the reset is done, you'll be provoked to setup your iPod as though it were new. You'll be given the alternative to stack a reinforcement on the off chance that you've made one previously, generally the gadget will be new and should be reloaded with music.

Utilizing Recovery Mode

1.Use this strategy if iTunes prompts for a password. In the event that you can't restore your iPod utilizing the iTunes strategy above on the grounds that you're incited for a password, or you've never utilized your iPod with iTunes, you'll have to put your iPod into Recovery Mode. This will permit you to restore it without requiring the password.

Since you are utilizing Recovery Mode, you won't have the capacity to make a reinforcement of your iPod before restoring it. You will lose all information on your iPod.

2.Turn your iPod totally off. You'll have to begin the system with your iPod shut down totally. Press and hold the Power catch and swipe the Power slider to turn it off.

3.Connect your iPod to your PC. The best way to utilize Recovery Mode is to associate it to a PC and use iTunes. You don't need to have matched up your iPod with that PC before.

4.Open iTunes. On the off chance that you don't have iTunes introduced, you can download it for nothing from apple.com/itunes/download.

5.Press and hold the Power and Home catches. Try not to discharge the catches after you see the Apple logo. Keep holding the catches until you see the iTunes logo on your iPod's screen.

On the off chance that your iPod's Home catch doesn't work, download TinyUmbrella from firmwareumbrella.com, run the system, then snap "Enter Recovery Mode."

6.Click "Restore" in the window that shows up in iTunes. This will start the restore process for the iPod.

On the off chance that this procedure still doesn't give you a chance to restore your iPod, see the following area.

7.Setup your iPod. Once the restore procedure is finished, you'll be incited to setup your iPod as though it were new. On the off chance that you have a current reinforcement, you'll have the capacity to load it.

Utilizing DFU Mode

1.Use this strategy if Recovery Mode doesn't work. DFU (Device Firmware Update) mode is like Recovery Mode, and numerous clients have reported this working when Recovery Mode doesn't. Like Recovery Mode, you won't have the capacity to make a reinforcement before your iPod is restored.

2.Turn your iPod totally off. Your iPod should be killed totally before you can enter DFU mode. Hold the Power catch and after that slide the Power slider to turn it off.

3.Plug your iPod into your PC and open iTunes. You'll need iTunes introduced to restore from DFU mode, yet you don't need matched up your iPod with that PC before.

In the event that your iPod does not have a working Home catch, download TinyUmbrella from firmwareumbrella.com. Run the project and snap "Enter DFU Mode" to continue.

4.Press and hold the Power catch for three seconds. Forget about to three noisy so you don't foul up the planning.

5.Continue holding the Power catch and begin holding the Home catch. Begin holding the Home catch after you've held the Power catch for three seconds.

6.Hold both catches for ten seconds, then discharge the Power catch. Keep on holding the Home catch in the wake of discharging the Power catch.

7.Continue holding the Home catch for an additional ten seconds. Your screen ought to stay dark, however iTunes ought to report that it has distinguished your iPod in Recovery mode. You can now discharge the Home catch.

8.Click "Restore" to start the restore process. Your iPod will start restoring, which may take a short time to finish.

9.Setup your iPod. Once the restore is finished, you can setup your iPod as new. On the off chance that you have a current reinforcement, you'll have the capacity to load it, else the greater part of your current information will be lost.

Credit site link: mp3 download

No comments:

Post a Comment